Installer a home alarm correctly does not stop at the installation of the latter. It is essential to think upstream about the locations where you will put your protective equipment. Installation and installation is not random without which your wireless home alarm system will not be effective.
Preparing to install a home alarm
Here are the 4 main points that will be studied to properly install a home alarm.
- Evaluate your home for the installation of safety equipment.
- Prepare detectors to install your home alarm.
- Install the control panel, sensors, and sirens
- Program the home alarm and test it
Installing a home alarm: The steps to take
Evaluate your home for the installation of safety equipment
In order to properly install a home alarm, the places where the security equipment is installed play a key role in its effectiveness.
Think about where your equipment kit will have the most impact when it comes to home protection.
The most convenient places are entrance doors, points of opening to the outside such as windows and interior doors.
The alarm centre
The vast majority of alarms nowadays are wireless, however only the control panel needs to be connected to a power supply or telephone jack.
Be sure to choose a location close to one of its outlets to take full advantage of the remote controls it offers you.
Position it in the center of your home to get the best possible signal range.
The placement of motion detectors should not be left to chance.
Install the motion detector preferably in a room with passage and especially in a place with a good viewing angle. Nothing should obstruct the field of view of the sensors.
In short, avoid placing them in a place where there is heat such as near a radiator or near windows where the sun’s rays give.
Also make sure that the movements of the curtains do not disturb the triggering for example.
Motion detectors should be placed in priority high on a piece of furniture, for example, or in a corner of the ceiling.
Installing an opening detector is very simple. One part is positioned on the frame and the other on the door leaf. When the two parts are separated, the siren activates.
It is important to place the opening detector on the most accessible doors and those that lead to your family or valuables.
Also favor doors that can not be bypassed. Finally, the most fragile doors are also to be protected.
The alarm keypad
The alarm keypad allows you to control your home alarm wirelessly.
The best place for a keyboard is near the main entrance door. This makes it easier for you to activate or deactivate your home alarm.
The indoor alarm siren
The alarm siren must be positioned in a place that is difficult to access.
Indeed, burglars must not be able to tear it away in case of intrusion.
Make sure to position the alarm siren as high as possible, or even on the ceiling. If your ceiling is low, place it behind bulky items. Be careful, however, not to obstruct the sound volume.
The outdoor alarm siren
It is important that your outdoor siren is visible. This is a first warning for people who want to rob you.
You must place your outdoor siren high and in plain sight so that it has as much range as possible in terms of sound. So you or your neighborhood would be alerted to a danger.
Prepare detectors to install your home alarm
It will be necessary to equip the devices between them before installation.
Connect power supplies
The control panel is usually connected to a power supply. Plug it into the nearest power outlet.
Also equip accessories such as detectors with batteries provided for this purpose.
Equip equipment with each other
The equipment at the control panel is the step that allows the proper communication between the elements of the wireless alarm system.
For example, the motion detector sends a signal to the control panel during a detection so that the latter can send a signal to the siren that will be triggered instantly.
Some home alarm brands offer equipment already fitted together. Otherwise, simply follow the user manual or mobile application which will detail the steps to be taken.
In general, simply place the equipment to be switched next to the control panel and press the synchronization button. An indicator light or beep will tell you that the two devices are well synchronized.
This step is essential for the proper functioning of the home wireless alarm system.
Install the control panel, sensors, and sirens
The alarm panel is the centerpiece of the protection system. The installation of the plant is very simple.
Attach the central alarm to the wall with the adhesive tape or screw it to the wall depending on the installation mode of your control panel. It should be noted that most do not require any work or special equipment.
Then connect the power supply of the control panel to the socket and connect the Ethernet cable to the internet box if necessary. Some plants use the Wi-Fi connection directly and therefore do not need an Ethernet connection.
Install the sensors
Start by positioning the motion detectors in the place you decided earlier. Follow the indications given before so that your sensors work properly.
Place them in height preferably.
Some require a hole in the wall and then a screw, but most simply land on a wall or with double-sided tape.
Install the opening detectors
Most opening detectors are installed using a magnet or double-sided tape that does not require any equipment or work. In some cases, you will need to drill holes and install the equipment via the hinges provided for this purpose.
The sensors are placed at the top of the door and on the window leaves.
Position alarm sirens and keypad
Install the equipment in the places you have planned beforehand.
Same handling as for previous equipment. Wireless home alarm packs are made to be installed easily.
This should not be a problem for you even if you do not have a notion of DIY.
Check that it is working properly
The equipment is directly equipped with a test button to ensure that the equipment is properly equipped. You will have to go through most often the application of the alarm mark where the steps will be indicated to you.
A flashing light or beep sound will tell you that the installation went well.
Program the home alarm and test it
Now comes the final step to finish installing your home alarm.
This is a very important step to ensure that the previous steps have been completed.
Program the wireless home alarm
You will go through this step by the keyboard or smartphone application according to your brand of home alarm. You will need to enter your installation code. You can then customize this code.
Then comes the user settings and basic settings such as time and date. You can also set up other features such as sending notifications in case of alerts.
Testing the operation of the home wireless alarm
Now that you’re done installing your wireless home alarm, set up your wireless alarm kit the way you want. Then exit the protected area and try to enter the area.
If your home is well protected, when you try to enter your home, the alarm siren will sound and you will receive a notification by SMS or call according to your settings.
If your siren doesn’t go off or you don’t receive a notification, go back to the previous steps or in your app’s settings because the installation wasn’t successful.
Why install a home alarm?
Installing an alarm for your home is essential if you want to keep your family and belongings safe.
Indeed, a home equipped with a home alarm system is much less targeted by burglars.
Beyond the protection it brings, deterrence is also one of its main faculties. General insurance tells us that home alarm systems deter burglars from attempting a break-in 1 in 3 times.
Thus, a wireless alarm system significantly reduces burglary attempts.
Installing a home alarm can save you a lot of trouble without it even going off.